Ford 601 Hydraulics

TommyB1974

New User
I'm still working on my father-in-laws 601 work master. Before i start tearing into the hydraulic system, I wanted to see if anyone has ran into this before. The 3 point lifts just fine, however when you go to lower it, it often (not always) sticks in the up position, even with weight on it. Its not binding. I did change out the fluid to see if that helped and it did not. the old fluid looked like it was from about 1500bc and looked like a milk shake so I'm sure I have a valve that's stuck in there but I'm not sure which one to look at or where to start.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top