ford 601 settleing

wrenchit

New User
how long should a lift stay up with weight. '58 ford 601
I am talking a 1960 model 72 Mott hammerknife as the attatchment.
 
I assume you mean AFTER you shut off the engine. The answer is "not very long". I also have a six foot Mott; the three point will stay up just a few minutes on my tractor before it settles. But there's no reason to leave the lift up, anyway. If you're going to work on the mower, you need to block it up.
 
Wrench:

If your lift was new or properly rebuilt it would hold your mower up for a week or two, however, few lifts on these old tractors will do so. If it will hold your mower up for 20-30 minutes when hot, it is probably in decent shape.

Dean
 
Like the others said.. If it keeps it up a few minutes.. even 5 is good/average. if it can hold it tens of minutes.. that's awesome. and any more is 'rebuilt' times.

soundguy
 
My 671 stays up overnight which makes me think that it"s been overhauled recently before I purchased it in Sept of 07.

Jack
 
After the engine is shut off most will not stay up for more then 5-10 minutes. My 841 will start to drop about 2 minutes after shut down and takes about 10 minutes to drop all the way down. Very common for them not to hold long. Yes they can be made to hold but it takes about $100-200 to fix
Hobby farm
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top