Ford 7600 cab

gford286

Member
I have a friend looking for a 7600 Ford factory cab. Does anybody know where to get one here in the states. He has an open station and wants to a factory cab on it.
 

I posted a Ford salvage yard earlier but it only appeared on Classic view. My advise speaking from someone who has installed aftermarket cabs on tractors back in the 70's-80's is for your friend to trade his open station tractor for one that has a factory cab already on it.
 
I added a factory cab to a 6600 there are a lot of small parts that are different. I had about $5500 in the swap. good luck
 
The 6600 after the swap was a pain to get in and out of because of the shift levers. My advice look for a 10 series 2 tractor much better cab. Check for old government mower tractors Not much wear on the drive train.
 
I would just sell the damn thing and go buy a 7710. Lot of small parts to change and then you turn the tractor into an absolute wh0re to work
on afterwards.

Rod
 
Thanks for the help. He can't get rid of the tractor since its his moms. It was the first tractor she bought when they ran the dairy farm. It has sentimental value to her or he would sell it.
 
Well, if you just need a cab to keep the rain off your head, I'd be looking for an older aftermarket cab. You pretty much take the fenders off and bolt the thing on.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top