ford genesis

Do you have to split these to work on the pto clutch? mine is good just curious. if anyone has a set of mirrors or would know where to get them for an 8970 i"d like a set. possibly a rear wiper and a set of front cab lights also..
 
cool. i'm glad ford finally got smart about the pto. any ideas why it would shift hard into 10th? i've calibrated the trans a few times but it still does it. not all the time but quite often. makes the whole cab shudder...
 
9 to 10 and 10 to 9 shifts are a little harsher because more than one clutchpack is released/engaged. There is a similar situation with a lower pair of speeds, but it isn't as noticeable due to the lower gear ratios involved.
 
this shutters pretty hard and almost bangs. doesn't do it all the time. i've never had one these shift that hard. if the accumulator was bad it would lag right?
 
turns out i had a bad computer, after that was replaced it seems to be fine. now if i can just get the stupid dealer to fix the hydraulics. wouldn't lift the discbine so i called them up. "just needs a couple o-rings" he says. $2700.00 later they bring it back. now it lifts wonderful, but won't hold, Now they say it's another $1000.00 for couplers with new check valves. when i bought the tractor should have asked for a jar of vaseline..... just needed to vent i guess..
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top