Ford9000puller

[born2farm]

I am trading a non running Jubilee that I bought to get the air breather off of for my 2000 RC. I need help in knowing what will work on my 2000 RC. First, will the complete draw bar hanger and draw bar off any of the row crop work? Will any of the air breathers off of the 134 engine work? And last is the power steering pump and cylinder. Please tell me what will work off of what.
Power steering pump and cylinder.
Draw bar hanger and draw bar.
Air breather.

 

[Ford9000puller]

Any rowcrop drawbar hanger and drawbar should work. The rowcrop drawbar has a longer drop than the all purpose. As far as steering goes the cylinder off of anything from a 900 through a 4000. 4 cylinder will be the same. You would want to look for a pump and bracket of a 701.901,2000 rc or 4000 rc. The 900s has a different mounting bracket. They would work but wouldn?t be original if your wanting to stay that way. Some of the 01 pumps were a canister type. You would want the pot style. I?ll try to get some pictures later. As far as the air cleaner goes I?m not sure on the Jubilee one. I?ll do some measuring of both and see if it would work.

 

[showcrop]

born2farm, I am not Ford9000puller but I do pull with a Ford 9000 and I have to 4 cyl row crops. The drawbars for the old row crops are very tough to find. One of mine came with a standard one, so I had it converted by a welding shop. The cut the vertical part and welded in a suitable piece to extend it. I have been using it for many years.

 

[born2farm]

Thanks.

 

[fordfarming]

I have new old stock.drawbar hanger and original deep drop drawbar
Would sell email.me [email protected] if interested