Fox forage chopper differences

[Jar7120]

We have a Fox 3300 pull type chopper. It only has a pickup hay head on it at the current time. We are looking for a narrow 2 row corn head to put on it next year so we can chop our own corn.

About 30 miles away someone is selling a Fox 3310 with a narrow row corn head on it. 1800 bucks for the whole thing. Im sure it goes as a complete unit. I know the head would fit on our chopper. If we ended up with the 3310 would 3300 parts be able to go on a 3310 or vice versa? If we ended up with both would one of them be able to be used as donor parts if the need arosed? We really don't need 2 choppers around but if one is parts compatible with the other it makes more sense to have 2 units sitting around.

 

[Don-Wi]

If you're on Facebook, there's a good group on there that would know for sure. If the heads fit, I'd think the rest would be pretty close and many parts would interchange.

https://www.facebook.com/groups/276153526270577/

Donovan from Wisconsin

 

[Fordfarmer]

I'm not real familiar with the 3300/3310, but I know some parts will swap.
I have a similar situation - I have a 4310 and 4410. Most parts will swap on mine, but until something happens to one of them, I'll keep both - no switching heads, that way. And I sometimes chop a few loads of hay to mix in with the corn silage.

 

[Jar7120]

Thanks for the info. Im actually a member
of that Facebook group and have asked the
same question on there actually but it's
been a few days and i have had 0
responses to my question.

 

[Jar7120]

Here's what our 3300 looks like to give you a idea.

 

[Jar7120]

It didn't post the picture

 

[RedRoundhead]

The factory parts book is for both the 3300 & 3310 - so 99% of the parts are the same. Looking thru it, did not find any major differences.

You should be able to find a parts manual on Ebay for very little cost. Thats what I did. Comes in handy.

Good luck - they are great machines.