Any suggestions on who to contact for a replacement part. The plunger(?) in the valve body broke at the bolt hole. Or other alternatives. I'm mechanically but not with hydraulics. Thanks!
Jim.ME
Well-known Member
- Location
- central ME
Very few valves can have a valve spool replaced as they are often fit to the bore. My thought is you need to start looking for a complete, new valve to replace it.
It appears Frey stopped building loaders in 2019 and parts support has likely gone by the wayside. Looking at a parts book online for the Frey WL165 loader it appears you need to first identify the valve your loader has. The book shows a Valvoil SD5 and a Bondioli were used.
Have you called the phone number on the FREY website?
FREY loaders
You can always take it to a machine shop and see if they can weld or otherwise repair the spool. That could cost as much as a valve and still not work just right.
Edited to add valve parts drawings
It appears Frey stopped building loaders in 2019 and parts support has likely gone by the wayside. Looking at a parts book online for the Frey WL165 loader it appears you need to first identify the valve your loader has. The book shows a Valvoil SD5 and a Bondioli were used.
Have you called the phone number on the FREY website?
FREY loaders
You can always take it to a machine shop and see if they can weld or otherwise repair the spool. That could cost as much as a valve and still not work just right.
Edited to add valve parts drawings
Last edited:
Upvote
0
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy