Front End Loader for 1020

[dpoc]

Hello,

I am trying to identify which model of loader is on the 1020 John Deere I have. I know it is a John Deere loader because I found a serial number plate but no model number. Which loader models fit on this model of tractor? Where would the model number be located? Thanks for your help.

 

[long green line man]

Loader models bought with or used on 1020 ; light duty 37; Reg. 47, most common; or heavy duty 48, with utility tractor mountings .... only places model would be is ahead or serial # on plate ; or decal on R & L frame masts....you can download Parts Cat. with pics, on JD parts com..

 

[Tx Jim]

I've also seen 1020's with 145 & 175 loaders installed. Can you post a photo of your loader??

 

[tomstractorsandtoys]

Do not forget the 143 as well.

 

[dpoc]

Below is a picture of the loader. I looked and did not find any decals indicating a model number anywhere.

 

[long green line man]

It's a JD # 47 ; utility mounts, They are a good match for a 1020 & also 2020....

 

[Stmartin]

Below is a picture of the loader. I looked and did not find any decals indicating a model number anywhere.

I was wondering if you could send some closeup of the rear mounting brackets that is if you still have the tractor. THANKS

 

[Jim.ME]

Welcome to the forums

Old threads don't get locked from replies here. This thread is almost 12 years old. Dpoc hasn't signed in for over 6 years. He might see your reply but not real likely. If you hold your cursor over a member's avatar most will show you when they last signed in.



Do you have a 1020 and a 47 Loader?

Below is a link to the 47 loader parts catalog. It shows the mounts for the 1020, 2020, and 2510. The front mounts are castings I can tell you that.

JD 47 Farm Loader PC965

Edit to add:

If you do have a 1020 or other JD utility tractor of that vintage, does it have these side frames between the front support and the flywheel housing plate. The are recommended with a loader to spread the stress better and prevent damage where the mounts bolt up.