Front loader advice for TEA20

Brucie

New User
Can anyone help please
I' recently bought am old Mil loader for my Fergie and have diligently stripped, and repainted all the frame, arms and rams.
I've come to assemble this onto the tractor but cant find a way to connect the lower arms to the tractor. Should they be connected? I have the version that bolts under the wheel guards on the back axel. I've watched numerous videos which aren't conclusive. When i bought it, it had come off an FE35 and the bracket underneath was very different to what i guess i need. Can anyone advise how the bottom arms are secured and where/ Are they secured or free?.. Is there a magical bracket/plate that i just cant find anywhere Ta Bruce
 

Among the videos you looked at was the one posted by Plough my field one of them. That's probably the most comprehensive you'd find anywhere.
A photo of what you are describing would help . I know the Banana loader was fitted to the FE35 but I've not seen a Midlands industries loader fitted .
Do you mean the lift arms at the rear ? If so you will need to fit an auto hitch T bar to isolate them and allow pressure to be diverted to the rams.
 
Pics and info off INTERNET
Quote:

The MIL loader was removed from this TEF, to make mowing hay easier. In 2005I refitted it using my Ferguson Crane; and in 2006, I used my High-Lift Loader (photographs to follow).


Bob...
cvphoto82060.jpg


cvphoto82061.jpg


cvphoto82062.jpg


cvphoto82063.jpg
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top