front loader pump

[tom norton]

ok, sorry for all the questions, but I just need the help.53 jubilee, have to replace front axle support, install new fan belt. It has a superior loader on front, can I just take the pump off, remove bolts from crankshaft and pull it out of my way to get the job done, ----or do I have to remove the loader completely? also, if I undo boltd at crank will I be able to get fanbelt thru? Thanks for any help or advice. Can't tell you guys how helpful this forum is and has been, really appreciate it, Tom

 

[Hippie]

I have cange the belt on my Jub.By pulling the 4bolts on the pump shaft and losening the pump mount bolts.

 

[tom norton]

hippie, you're talking about the bolts that go into the crank pulley, right?Or pull the pump out altogether, I don't have a clear picture in mind, sorry

 

[Hippie]

Loosen the pump from its mount. After removing bolts to crank. Did not remove the pump
If the rain stops Ill try to get a pic

 

[tom norton]

thanks, hippie, I think I gotcha now

 

[ROADMAN]

Just changed the fan belt on my 850 with a front mount pump. I just removed the bolts from the pump mount and slid it forward. It was enough to belt the belt thru. Tight squeeze but it worked.

Clay

 

[tom norton]

thanks, I'll try it

 

[tom norton]

finally got it, thanks a bunch all!