Mnethercutt
Member
Really weird and frustrating issue with my 1010. I can't get gas to come out of the tank, unless I disconnect my fuel line from the carb. It's almost like there's air preventing fuel from flowing down into the carb. I've got a fuel sediment bowl (new from tractor supply) connected to the fuel tank with a rubber line running out from that. Rubber line connects to the original metal fuel line that runs to the carb. I have removed and cleaned out the lower carb section, and if I open the fuel line with the lower section of the carb removed gas flows freely through the upper section like it should. Up until yesterday afternoon I couldn't get any gas to come out the carb drain plug if the carb was assembled. I barely got the tractor to run yesterday but it really didn't want to and I'm not sure what I did to get it running. Any thoughts as to what's going on?