I have a 1939 farmall f14, it was dads,did a fuel pump rebild,now fuel bowl leaks,got new gasket both rubber and cork also new bail,fuel bowl got dropped and shattered,trying to find another but no luck,i have no mesurments,,,,,,,,,,,,,,,any ideas ????????
 
With the bail on the base measure down to the bottom from the base then measure the diameter inside the lip of the base for the gasket . this will give you a pretty close size then with Jim's places to look measurements should be very close and if just a bit short or long you do have a bit of adjustment in the threads on the bail with the screw.
 
With the bail on the base measure down to the bottom from the base then measure the diameter inside the lip of the base for the gasket . this will give you a pretty close size then with Jim's places to look measurements should be very close and if just a bit short or long you do have a bit of adjustment in the threads on the bail with the screw.
Thank you very much, i will try
 
I have a 1939 farmall f14, it was dads,did a fuel pump rebild,now fuel bowl leaks,got new gasket both rubber and cork also new bail,fuel bowl got dropped and shattered,trying to find another but no luck,i have no mesurments,,,,,,,,,,,,,,,any ideas ????????
IIRC, they used an AC fuel pump?

Search on ebay for "AC fuel pump bowl". All sorts of 'em, used, NOS, etc., some with measurements. If not AC, probably about the same for other brands, as well.
 
Try Fordson house esconoba mich. for replacement bowl
without seeing the bowl suggest looking into
loctite makes a epoxy resin adhesive that resist gas ,will get you running till you find a bowl
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top