KennyDiesel
New User
Drove G JD down road today and came back and would run on , after turning key off. I had counted teeth on flywheel and like 22 teeth should be around
26 degrees timing . Set this mark at WOT and at idle it came real close to mark for idle. If I set distributor by points opening , to flywheel timing mark ,
it is different than timing light.. Im I doing something wrong? Idle speed is 380 , wot is 1190.
26 degrees timing . Set this mark at WOT and at idle it came real close to mark for idle. If I set distributor by points opening , to flywheel timing mark ,
it is different than timing light.. Im I doing something wrong? Idle speed is 380 , wot is 1190.