G955 A/C Compressor Mount

[mthopetractor]

Does anybody have an A/C Compressor bracket for an MM G955/G1355
Even detailed pics of one so I can make a new one would be much appreciated

 

[wore out]

(quoted from post at 13:23:41 04/06/23) Does anybody have an A/C Compressor bracket for an MM G955/G1355
Even detailed pics of one so I can make a new one would be much appreciated

Key #30, Agco #30-3086852 ''mount''.

WOW, there's a lot to that mount!

Unless this is to be a ''correct'' restoration you would be greatly ahead to fabricate a mount for a modern axial compressor (such as Sanden).

They are MUCH more reliable than the old ''brick'' compressors and shake a vibrate a LOT less so the mount doesn't have to be as ''strong''.

 

[caterpillar guy]

Those old Kholer and Tecumseh compressors were junk new. The connections leaked terrible and always fooling around with them.

 

[mthopetractor]

(quoted from post at 14:05:19 04/06/23)

(quoted from post at 13:23:41 04/06/23) Does anybody have an A/C Compressor bracket for an MM G955/G1355
Even detailed pics of one so I can make a new one would be much appreciated

Key #30, Agco #30-3086852 ''mount''.

WOW, there's a lot to that mount!

Unless this is to be a ''correct'' restoration you would be greatly ahead to fabricate a mount for a modern axial compressor (such as Sanden).

They are MUCH more reliable than the old ''brick'' compressors and shake a vibrate a LOT less so the mount doesn't have to be as ''strong''.

Thanks for the tip, We do have a new Sanden Compressor here from AP Air

 

[Hobo,NC]

That's a fancy conversion. They also have the mount kit and manifold separate. I would like the see the condenser but no pix are description. If converting to 134A the condenser is what will make the big difference.



https://www.apairinc.com/shopping/productDetails.aspx?i=146283&c=0

This post was edited by Hobo,NC on 04/10/2023 at 04:16 am.