Gleaner A2 settings

I purchased a gleaner a2 and I want to try it on some corn but I can't find the settings in the manual so do any of you guys have an idea of how everything should be set? Thanks
 
I don't have Gleaner A2 but older conventional Gleaners with closed cylinders should be pretty much set the same way. Concave clearance set about 3/4" with channel bar on the door (#1) and #3 and #5 positions. Adjust wider/narrower to get whole cobs out the back. Cylinder speed set pretty slow (around 400 rpm). If you have a long finger corn chaffer (not sure what chaffer options were on A2), it should be set barely open to float trash and cob bits out the back. Short finger (standard) chaffer would have to be open more to allow the volume of corn through. Might have to drive slower and close down a a standard chaffer more if you have too much trash in the bin. Sieve set farther open to allow higher volume of corn through to the clean grain elevator. Fan set close to wide open.
 
I also have a Gleanor A2 with a 330 corn head with similar problems that I married to combine, but it runs too fast...needs to slow down and quit throwing cobs off to side...does not have varible speed clutch..it needs one I think...If I had some pictures to look at of drive pulley on your machine that might help me...thanx John
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top