Gleaner k2

[D&C Farm]

Can a k2 be hauled on a dual tandem gooseneck looking for weight height length width info before I drive to look at one

 

[JD Seller]

It would be too tall even with the tires off.

 

[MH]

I hauled one and it measure 13'4" tall
sitting on the trailer after I let the air
out of the tires. They weigh a little less
than 10k without a header.

 

[JMS/.MN]

IIR I"ll check my literature on Sunday...weight, dimensions, etc. Is it standard, or does it have bin extensions...

 

[D&C Farm]

It appears to be standard cab is tallest part it's on Louisville Craigslist both heads what is going price for these machines

 

[Gleanerk2]

I hauled one 20 miles on a single wheel gooseneck with a f250 pulled
nice low power lines were a problem had to go slow

 

[JMS/.MN]

length- with grain hdr...283.3 inches
overall- base....221.0 inches
width- overall base....94.9 inches
height- with cab....129.2 inches
wheelbase....114.1 inches
weight....8434-9982 lbs, depending on grain, corn soy, or corn plus version

 

[c_eilers]

I sold my K2 last March it was hauled on a goose neck trailer. The 12ft head upfront,then the 3row corn head,and then the combine,backwards on the trailer. The large tires were on the dovetail,so it would lower the cab height.And we let out the air in the tires also. It was hauled from west Michigan to Eastern New York state.Not something I would have done,but thats what the guy hauling it showed up with.Hope this helps!

 

[GreenEnvy]

We've hauled a JD 3300 and a JD 55 from Iowa all the way back to Montana with no problems.

 

[MikeinKy]

I have hauled a F2 on my gooseneck, twice, when I bought it and when I sold it. The first time from Shelbyville, In to my farm in n. Ky and then from home to Bardstown, Ky. Each trip was about 80 miles.

 

[MikeinKy]

Also, JD seller, I think you are wrong, It was 14 ft. with the tires on and aired up. So it wouldn't be over 13 with the tires off.