Mad Farmer
Well-known Member
- Location
- Northeast
I had to replace the manifold on my 1940 9n. First aftermarket one would not clear the throttle linkage even after grinding on the manifold. I got a second one which fit up great and good clearnace with linkage.
Now the tractor seems to race a bit going downhill and takes more time to throttle down. Not sure what has happened? Linkages are all free and no worn out/play. Am I missing something? Gaskets on carb and manifold were replaced and permatex aviation sealer used on both, not likely an air leak.
Any thing I should do to check the governor? Otherwise tractor runs fine w/good power
Now the tractor seems to race a bit going downhill and takes more time to throttle down. Not sure what has happened? Linkages are all free and no worn out/play. Am I missing something? Gaskets on carb and manifold were replaced and permatex aviation sealer used on both, not likely an air leak.
Any thing I should do to check the governor? Otherwise tractor runs fine w/good power