I have a JD40T that I just picked up. The previous owner had the carb being controlled without the throttle on top. I purchased a new connecting rod that connects the Gov and the carb. Problem is when I try to throttle up over 1/4 throttle the gov revs the carb up like crazy. Any thoughts? at idle the gov seems to work fine keeping it running at low idle. When I get it up over 1/4 throttle it takes off screaming. Please assist with any thoughts available. Thanks RJ ([email protected]
 
Any governor fights against a spring.

The hand throttle will pull on the spring somewhere and when the engine revs up the governer will pull against the spring and carb linkage slowing the engine down to governed speed. As the engine slows under load the spring will sense this and open the carb up slightly.

Hope this makes sense.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top