GP question

[Brent grieves]

Timing on a GP, I got my marks lined up and it starts and runs but it still seems rough, when my marks are lined up on the flywheel the coupler is not completely horizontal

 

[Lumbersawyer]

I'll look at my GP and see where my mag coupler is.

 

[Brent grieves]

I'll look at my GP and see where my mag coupler is.

Thanks

 

[Lumbersawyer]

I checked my GP and when the LH impulse is at the mark the coupler on the mag is horizontal. I rebuilt my governor weights and put seals in the fan shaft, mag drive when I rebuilt the top end back in 2017.

 

[Brent grieves]

I checked my GP and when the LH impulse is at the mark the coupler on the mag is horizontal. I rebuilt my governor weights and put seals in the fan shaft, mag drive when I rebuilt the top end back in 2017.

Okay, I re did it again and it’s a little closer but not perfect, probably worn a little

 

[Mark-Ia]

You can buy a new coupler from Tractor Trauma Center in Eldridge Iowa or Michael Leitner in Mo.

 

[Brent grieves]

You can buy a new coupler from Tractor Trauma Center in Eldridge Iowa or Michael Leitner in Mo.

Thanks good to know