Guys' need some engine help "rough main"

[4435]

Had intents of just an under haul. Rods looked good mostly all plastigage good. While going thru the mains #6 the thrust looks really bad has the groove "ripped" in the bottom shell like the upper half, has some grooves in main journal an some metal transfer can snag a fingernail in grooves. Thinking of trying to polish in the frame.

Need to use to plant wheat which is on me right now.

6bt cdc. Thought and suggestions please. Thanks Tom

 

[ralph wilton]

Use some fine emery cloth and you"ll be fine I"ve done this a
lot

 

[C. Amick]

Get the emory cloth that comes a narrow roll.