Gvi lp

[1974vette]

I am try to get this old girl up and running and have a couple questions. There is a gauge that is connected to the propane filter housing with a small tube like oil pressure line
What is it?
Another dash piece possibly amp light? It is not cig lighter that’s on other side
Thanks also anyone have these parts?
What is on the bottom of carb?

 

[MMDEL]

Dean Zingre might know. to me it looks like someone rigged up a primer. It is not MM What does the tube connect to on the other end??
The dash piece might be the button to activate the primer.
MMDEL

 

[DEAN ZINGRE]

I agree with MMDEL . I 've never seen a small line at the Tee on an Ensign filter. Looks like a cable handle on the dash , for what ??? Long Tee fitting attached to the body of the Ensign carb. is also someting unknown to me.

 

[1974vette]

The t handle seems to be a shut off or choke which I didn’t think u need on a lp tractor. The gauge to the ensign filter is probably because the tank gauge don’t work. I’m not sure.
I’m looking for parts if h know who has stuff please give me the contact info. Thank you

 

[lstra]

The gauge on the filter is not going to tell you the liquid level of fuel in fuel in tank. When that pressure gauge starts dropping, not going to far.

 

[jnf]

I am try to get this old girl up and running and have a couple questions. There is a gauge that is connected to the propane filter housing with a small tube like oil pressure line
What is it?
Another dash piece possibly amp light? It is not cig lighter that’s on other side
Thanks also anyone have these parts?
What is on the bottom of carb?

These items appear to be add-on. They are not on my GVI LP. I would be inclined to delete them.

 

[1974vette]

These items appear to be add-on. They are not on my GVI LP. I would be inclined to delete them.

I am finding out that this tractor has been modified. Does anyone know a good salvage yard or anyone that has these moline lp parts.
I found a couple guys out here but are diesel gvi. Thanks

 

[jnf]

I am finding out that this tractor has been modified. Does anyone know a good salvage yard or anyone that has these moline lp parts.
I found a couple guys out here but are diesel gvi. Thanks

It appears to me you can remove the lines from the filter housing and bottom of the carb and plug or cap those ports. Those are original MM components (filter and carb).