H260 Continental Engine piston set

[khmarch]

Hello,

I am rebuilding my dad's old Massey Harris 44 tractor that I drove when I was a kid.

I am having a hard time finding a NEW piston kit for it.

It has 4" over bored pistons in it.

Any help would be greatly appreciated.

Thanks

Keith March - Ohio

This post was edited by khmarch on 05/27/2023 at 12:06 pm.

 

[MHPull44]

CIP ENGINE PARTS. Phone: 713 864 7084

I would try them

 

[rustred]

continental engines. edmonton alberta.

 

[khmarch]

Emailed them.

They (CIP) don't do anything with that engine anymore.

Keith

 

[khmarch]

Do you have a web site or phone number?

Keith

 

[rustred]

780-426-3890. 5511-82 ave edm. ab.

 

[khmarch]

(quoted from post at 06:59:33 05/28/23) 780-426-3890. 5511-82 ave edm. ab.

Called and talked to Harold.

He gave me a name and number:
Montes Equipment - Jerry
(312) 225-2660

$1,100 for a Piston Kit.

This post was edited by khmarch on 05/31/2023 at 01:01 pm.

 

[khmarch]

Here is my 2nd H260 engine.

It has different pistons in it.

I used my digital calipers and it came out to 4.0625" or 4-1/16" inside the sleeve.

My tractor says 44. But I am wondering if it is a 44 Special

Keith

This post was edited by khmarch on 05/31/2023 at 04:42 pm.

 

[JJL]

You have M&W pistons & sleeves in your 44. They are 4 1/16 diameter and domed for higher compression. If you install new 4" pistons and sleeves do not throw the old ones out. Someone out there is probably looking for some.

 

[Massey 187]

Here is my 2nd H260 engine.

It has different pistons in it.

I used my digital calipers and it came out to 4.0625" or 4-1/16" inside the sleeve.

My tractor says 44. But I am wondering if it is a 44 Special

Keith

This post was edited by khmarch on 05/31/2023 at 04:42 pm.

Did you replace these pistons?