scoobieguy
Member
Hello I have a 1955 early model with the bellville type clutch. I need help with the input shaft seal replacement / disassembly. The previous owner went crazy with rtv seal, it was a challenge to pry appart.
I've searched around and watched 2 videos
on the input shat seal replacement,
I got the 2 circlips removed and I used the 2 threaded bolt holes to pull on the bottom plate however it doesn't seem to want to come off / out like in the videos I watched maybe they are a later models. I don't want to keep pulling and break something. Its coming out approx. 1 in with the bolts. I haven't tried a 3 jaw puller yet. Picture of the 2 circlips and the bottom plate.
I've searched around and watched 2 videos
I got the 2 circlips removed and I used the 2 threaded bolt holes to pull on the bottom plate however it doesn't seem to want to come off / out like in the videos I watched maybe they are a later models. I don't want to keep pulling and break something. Its coming out approx. 1 in with the bolts. I haven't tried a 3 jaw puller yet. Picture of the 2 circlips and the bottom plate.
