Dieseltech

Well-known Member
Location
Akron, Indiana
If you do have a cracked line I do have some used lines here. Also, set your 3/8 torque wrench to 40 FT/LB and check the line cap nuts, 1/2 turn will usually get them to 40 has been my experience on the mild steel washers I have best luck with. I do have some Stanadyne 11354 copper washers too that I use on hydraulic heads with chipped outlet ports where the steel can't seal due to there smaller OD size.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top