Hydralic control connections

telephoneman

New User
Please see enclosed photos.I need to know where each connection would go.It's on a Ford 660 tractor that was in a fire and hoses are burnt off.
cvphoto37564.jpg


cvphoto37565.jpg


cvphoto37566.jpg
 
There are 4 hoses so you have power up and down on that loader. So you hook the hoses for the left control to either the bucket or the lift and the right hand one to the other one. Hoses go with the way the valve moves so the left control you have the forward and back to either the lift or bucket. etc.
 
You have a Gresen SP control valve The handle on the right controls the bucket tilt cylinder with the hose closest to the handle going to base end of the bucket cylinders. The left one controls the loader lift cylinders with the base end of the cylinders attached to the left control handle rear port. While you are doing all this work put new O-rings in the valve. More questions?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top