hydraulic control valves

[kgwildman]

I have a 560 that I need to replace the control valves that control the loader. The ones that are under the steering column. Where can find them. Thanks

 

[DeltaSteve]

Those are IH only.For a 4/560 only.Not sure if a 400/450 is the same or not. They are not a generic gresen type spool valve. What's wrong with your's? Leaking? not developeing pressure? They use common Orings. Other issues?.There are other parts that are IH only,and some are no longer available.

 

[kgwildman]

Thanks, I guess I will rebuld mine. Thanks again.

 

[DeltaSteve]

You need to get a parts diagram. Become familiar with it before you tear it down. As said go see your IH dealer.See what is available,and which is NLA. O rings can be had from many scources. But keep it simple and use your IH dealer.

 

[300guy]

If they are similar (or part numbers) to the 300 ones, the are NLA. All the inside parts are available through IH. I rebuilt mine a few years ago because the garter springs that center the spool valve were broke and would not center the valve. All the mounting o-rings and such were available through IH.