Hydraulic pump coupling

[Delgriffith]

Hello,

I'm thinking about trying to use this pump with a splined shaft on my tractor but the tractor's double chain coupling off the front of the engine has a keyed shaft. It's described as a 3/4 11T Spline coming out of the pump and the sprocket I need it to attach to is a 40 pitch 16 tooth with 3/4 keyed bore. Is there an adapter or a place to get a splined sprocket?

Thanks!

 

[chevytaHOE5674]

Buy a 3/4" 11t coupling and a 40p 16t sprocket and either bore the sprocket out to fit the coupling, or turn down the coupling to fit the sprocket.

3/4"-11 Tooth Splined Coupling G & G Mfg 99920000 | Keyed, Splined & Hex 1 Piece Solid Couplers | Shaft Couplers | Power Transmission | www.surpluscenter.com

3/4 -11 Tooth Splined Coupling G & G Mfg 99920000, Keyed, Splined & Hex 1 Piece Solid Couplers, 3/4 -11 TOOTH SPLINED COUPLING, SPLINED SHAFT COUPLERG & G Mfg,99920000,

www.surpluscenter.com

16 Tooth 1-1/4" Bore 40 Pitch Roller Chain Sprocket 40BS16H-1-1/4 | Finished Bore Sprockets | Roller Chain Sprockets | Sprockets & Roller Chain | www.surpluscenter.com

16 Tooth 1-1/4 Bore 40 Pitch Roller Chain Sprocket 40BS16H-1-1/4, Finished Bore Sprockets, 16T 1-1/4 BORE 40P SPROCKET, 40 PITCH ANSI ROLLER CHAINConcentric International,40BS16H-1-1/4,

www.surpluscenter.com