If you have a double acting valve connected to the hitch cylinder with 2 hoses, ans a pressure hose from the pump, and a return hose to the reservoir, changing the ports connected to the cylinder will change which way is up when moving the lever. Jim
 
The belly pump on an m is strictly a one-way system. Hook the hose from the valve to your three point hitch and pull the lever as you normally would. If you want two way hydraulics you will need a spool valve. Run one hose from your belly pump to the in port on the valve, the other hoes from the return to the belly pump fill or drain plug. Secure/toe off the handle to comstantly circulateThen you will have two way hydraulics.A 'mag pump will be plumbed similarly.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top