Identify 3 bottom plow

[Doosie]

Acquired this 3 point 3 bottom plow and need to identification

 

[kevinj54]

Looks like Case

 

[GWIndy]

Case BER or BE

 

[plowman]

Hi Model Case BER Series. I do have a manual for that plow. Thanks Steve 419-618-0017

 

[Adirondack case guy]

You will have to change the pins for the draft arms, unless you have a Case tractor with eagle hitch.
Loren

 

[tjandrews]

Sure looks like a Case BER to me. They were designed for the Eagle Hitch Tractors. The three bottom was for the DC, but if you take the third bottom off it works nicely with an SC. This one and my grandfather's SC have plowed hundreds of acres over the last 60 years.

I did change the pins out of mine once to use it with an International 424, but it never worked as well with it as it does with the SC. And those Tractor Supply pins didn't hold up nearly as well, either.

If you use it, be sure to take the release apart, clean it up, and keep it greased. And check it each year before you go to plow. You don't want to hit a rock with that froze up. Don't ask how I know this, just trust it as fact...

 

[Doosie]

(quoted from post at 11:14:23 03/30/19) Acquired this 3 point 3 bottom plow and need to identification

Thank you all for your response I believe that I will sell it or trade for a JD plow If anyone would be interested in it let me know Thanks again for the information