Ignition Coil Wiring

I am converting my M to a 12 volt system. How do I hook up the coil to the distributor. Does it hook to the positive or negative side of the coil to the distributor. Our battery is negative ground with an alternator.
 
Also, be SURE it's a "true" 12-volt coil, or if it's NOT, be SURE you are using the correct ballast resistor with it.
 
hgf
H-Mdiagram.jpg
 
Connect the + terminal to the positive side of the battery and the - terminal to the negative side of the battery.

In a negative ground system the - terminal goes to the points. If you have a positive grounded system the + terminal goes to the points.
 
As posted, simply match the coil to whichever ground you have i.e. if at Neg ground the coils -wires to distributor and its + receives Ignition Switch voltage. It can still produce a spark if wired wrong but its more efficient if wired correctly.......

John T
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top