I am looking at my 1680 combine. The guy has a 30 foot grain table to go with it. What I’ve read on the Internet that is almost too much of a table for that machine. So what is your thought?
 
I had one for many years, on flat ground you should be ok but I would watch how hard you push it, 25 Wouk be better. Also if I was running in hilling ground I dump the tank at the half way mark as not to over do the hydro. I do the same on my 2388 as I don’t feel the little extra time with a few more dumps is as bad as a rebuild on the hydro. As my ground is half dead flat others hilly.
 
I am looking at my 1680 combine. The guy has a 30 foot grain table to go with it. What I’ve read on the Internet that is almost too much of a table for that machine. So what is your thought?
I assume its got Field Tracker. I used a 25' head on a 1666 with very good results for several years.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top