bigears

New User

Can anyone tell me anything about the International 330 Utility tractor? Good or bad....Im interested. Understand they only made them for 2 years....are parts hard to find? Thank you.
 
It was a nice utility tractor with chassis features of a 350U derived from the Farmall 350, 300, then Super H, H as its historic linkage. The engine is derived from the super C and its later versions. The combination is just fine. It is heavier than a 200 series. Steering is power, and not difficult, though there are no CaseIH supported steering components. Check for wear on hitch pins and pivot points (looseness indicates substantial field use. Handy. I own a 350 U Jim
330
 
At this stage of the game it's all about the condition of the tractor you're looking at. It's 64 years old, which is a pretty good indication that there aren't any huge flaws with the machine. As with any 64 year old machine it will be worn, and anything could fail at any moment, so keep that in mind too.

I'm pretty sure steering could be power OR manual on these tractors. Steering can be an issue on these tractors especially if the tractor has a loader on it. It was not meant for a loader.

Parts availability is as you'd expect for something this old. Some things you can get, some you can't. General tuneup parts are widely available because there are close to a million engines that use them. Parts for the steering gearbox are unobtainable. You can't even find a salvage tractor with a good used steering box anymore, as they have all been picked over, and there is STILL a waiting list for good used steering boxes.
 
The steering gearbox can be a problem and Farmall/IH did NOT build enough of them for there much in the way of steering gear parts. Case/NH/IH doesn't have them and I don't know of any other supplier who does.

Rick
 
Just a 'smaller' version of 300/350 U. What Barnyard says. All about condition.Decent little tractor when used within it's capabilities.
 
All they were in the simplest term is a 340 engine mounted to a 350 rear end. Back in the day, IH had the engine for the next model of tractor (the 340) ready but did not have the rear end done yet so they mounted the engine to a 350 rear end and came up with the 330.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top