IH Mower

[GordoSD]

Here is the innermost section of my IH balanced head mower bar. You can see tow holes, they are 1 inch on center. Is there a "half" section , maybe 2 inche wide that goes in there?

 

[casecollectorsc]

Have seen 1/2 section, clean-out section, at Runnings made by Herschel that would probably work there.

 

[rrlund]

They're a kind of a one and a half.

 

[GordoSD]

I need just the half. You can see that one won't work. I have that one on the outer end.

 

[rrlund]

This goes on in place of the one on the end. You take the one out that you have and put this in. It covers a section and a half.

 

[rrlund]

Should have added,there are two different configurations of those. One for the outside end and one for the inside. The inside one has the half section on the opposite end.

 

[Bob]

The parts catalogs for the 100 and 1100 mowers do not show a half-section at the knife head.

I wonder if your knife head is for a swather or mo-co???

ANYHOW, if there is room there, you can try a left-hand half-section 619077R1, some $2 at the CIH dealership.

<img src = "http://thumbs2.ebaystatic.com/d/l225/m/mhWEoI41RVFNiHztnXqZvfw.jpg">

I can't find a photo, but they would look like the MF ones in the photo, but reversed.

 

[Lazy WP]

You have something wrong. Either someone change all the sections and started wrong, or you have the wrong sickle. Do the rest of the sections line up correctly?

 

[GordoSD]

What can you start with?

 

[GordoSD]

Look closely. I would need a big one with FOUR holes

 

[GordoSD]

Can someone count their sections? I have 35 normal, the section and a half on the outer end, and those two open holes.

 

[rrlund]

At the end of each stroke,are the sections stopping dead center on the guards? Not between the guards,but on them.

 

[Bryce Frazier]

Gordo, that looks JUST like my IH 990!

It had a home made section in the end there. Someone took a standard section, cut it in half and drilled another hole in it...

I decided to just go ahead and put a standard "one and a half" piece on there, like RRlund posted a picture of. THEN I went ahead and put a rivet in that last hole just for good measure. Cut 7 acres perfectly... Not sure, but I would guess that it is something "special" to IH...

If you find a correct solution, PLEASE let me know! I would like to know what mine should have.... Thanks! Bryce

 

[jicaseman89]

I have a 100 ih mower its just a clean out section mine broke or i broke it once and i made one out of a regular section also still cutting

 

[jicaseman89]

I just ran out to the shed in the the rain lol the sickle for my ji case combine has the same as yours i can take a picture of my mower sickle in the mornig but i cant upload computer clunked out and smart fone wont let me but i could email you a picture of it if you want Gordo
Loren

 

[GordoSD]

text me the pic, 605-770-38four zero

 

[GordoSD]

I have a 990 in the imp row. I'll give it a looksee.

 

[GordoSD]

I just checked my 990 moco. It has a "one-half" section as the very first one.This one is non serrated and VERY dull. Will get to that before I mow with it.
Do you have the factory Manual for the 990? You can borrow mine for a week if you want.What you do during that time is up to you. LOL.