Found this online the other day and figured everyone would be interested to see it. Says it was a larger than life prototype that began production, but never completed and cost IH a huge loss. Anyone know anything about this. Genuinely curious about this beast
mvphoto66721.png
 
Their was a gentleman that had a complete set of International crawlers at the Tulare, California old tractor show a couple of years ago. All beautifully restored. This is the TD24 still on the truck.I don't think that any of them ever had a blade on them.
cvphoto67247.jpg
 
At an auction long time ago I sat in a idling HD41. Afraid to try to drive it (had no interest in buying it) so I raised the blade & dropped it to the ground. Unsuspecting guy to one side jumped 2 foot off the ground when it hit. Big machine.
 
Looked about buying a power unit in Circleville Ohio many years ago. The power unit used the engine of a TD-24. It was a factory set-up.
 
John Walker the man in the Red Power article is a good friend of mine and only lives about15 miles away. As you can see he has a good collection of IH crawlers and will always bring them to shows and working days.
 
I think that is an early attempt at photo shopping.

If it were real the headlights would be the size of 5 gallon buckets.

Also th tractor is casting a shadow, the men are not.
 
(quoted from post at 04:48:52 12/17/20) I think that is an early attempt at photo shopping.

If it were real the headlights would be the size of 5 gallon buckets.

Also th tractor is casting a shadow, the men are not.


I see shadows on my screen. It looks like a mock-up to me. Perhaps made of wood. I agree that on a production model the headlights would be standard size. There would be no need for larger ones.
 
That would be one odd thing. I have been around ih for over 60 years and have never seen any mention of 24 with loader, 14,18s yes but 24 would be large for a loader.
 
Here’s a stunt they pulled off at Junkshow back in 2013. That an AC model M on top, a Cletrac F in front, and a D-2 in back.
The 41 was the big dog of its day until the Komatsus and the D-10 came around.
cvphoto67254.png


cvphoto67255.png
 
I don't know much about them a guy down at Bottoms Bridge VA had it sitting in his side yard with about half the turning clutches pulled out of it,he wanted to sell it cheap just to get it out of the way.Same guy had an AC K crawler down in the woods that had quit running about 30 years ago while it was pulling a log
would have had to chainsaw for about a half a day to get it out,both are probably still there.
 
Thats much taller than a Allis HD41, there is one the owner gave to the show club, at Albany Minnesota, the top of the tracks are about 6 inches taller than me standing next to it, this looks like it two feet taller than that!
 
If that unit would have ever went into production the man i worked for as a kid wold have had atleast two . as he had every brand made Cat, A/C, I H , Ecluid , Emco . Smallest one being D4 Class and up to the largest . He always wanted MORE POWER move more dirt faster . We had a lot of problems with the TD 24's and yes some of them were getting long in tooth been rode hard and put away wet. A/C's were another problem child and on down the line . The Cats held up far better .
 
A local sandblaster used to have a huge LeRoi compressor mounte on a semi trailer, pulled by a B61 Mack. The compressor was an old US Navy unit, powered by a TD24 power unit. Had to go get it running for him one day, points bad etc. Was parked in a neighborhood, neighbors were NOT amused when it lit off, no mufflers of course lol... Local quarry owner always had to have the biggest dozer around, had an HD41 for a long time, then a D10, and then came the D11. He bought it used out of a big mine, not a good idea, undercarriage and tracks were shot- parts were VERY expensive
 
(quoted from post at 09:35:01 12/17/20) If that unit would have ever went into production the man i worked for as a kid wold have had atleast two . as he had every brand made Cat, A/C, I H , Ecluid , Emco . Smallest one being D4 Class and up to the largest . He always wanted MORE POWER move more dirt faster . We had a lot of problems with the TD 24's and yes some of them were getting long in tooth been rode hard and put away wet. A/C's were another problem child and on down the line . The Cats held up far better .


Hey tractor vet, did he have a Euclid TC-12?
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top