Isekai finally fixed update

[fpappal]

I finally got my little Iseki TX1300F running today. A few months ago I posted some questions on this forum. Clutch failed, tractor would not start, low compression. I installed a new pressure plate, clutch disk, and throw out bearing. When I split the tractor the throw out bearing was seized, it destroyed the fingers on the pressure plate. So the poor starter was trying to spin this seized bearing. With the new clutch parts installed the tractor started almost immediately. In the two years I have owned it the tractor always started hard, and the bearing always whined with my foot on the clutch pedal. Problem solved, thanks for all the help.

 

[Tom in TN]

fpappal,


I wouldn't know an Iseki if it bit me, but I looked it up on Tractordata.com. Looks like a neat little tractor. Four wheel drive and about 17 HP.
Congratulations on your success.

Tom in TN

 

[Traditional Farmer]

Iseki built tractors for several US companies

 

[kencombs]

Yep, I had one wearing a Bolens badge. Purchased from a dealership stock when Bolens entered backruptcy. Factory rep was closing dealerships and I got it with 4wd and little loader on it. $3200! Added 300 and he threw in a 4' flail mower.

Used it landscaping a new house and 4 lots, mowing etc for 3-4 years and sold the package for 3500.

Best tractor purchase/sale I've experienced.