JD 146 Loader

Tim Nelson

New User
Does any one have laying around they will sell, or can provide me with dimensions of the Lift arm for removeing and installing loader to tractor. Arm is offset, one end mounts to tractor frame and other to loader tower(which this end is a slot). Didn't get with 2640/146 tractor/ loader combo. I bought last fall.
Parts are not available from JD.
Thanks for any help.
Tim
 
Turn the bucket underneath the loader, in other words all the way down. Set it on the ground, unhook hoses, remove 4 bolts on each side of pedestal amd tip the loader up. It will stay up a foot or two. To put it back on drive tractor in loader and pull loader down. Done it hundreds of times on a 2630 with a 146 loader. Got to have the bucket on it to do this tho. Bucket has to be rolled all the way down.
 
So when you say lift the loader, do you mean by hand? or with a winch? Is it a weight balance of the loader and bucket position?
Thanks forthe help.
Tim
 
Yeah, if I remember right it doesn't weigh more than 60 or 80 pounds to start it up, then it will go on its own. Doesn't take much to pull it down either. Put a block where your front wheel sets so you don't pull back in it too far. Mine had a six foot bucket on it and you won't believe how easy it is. You can have that loader off in 5 minutes easy if you keep the eight bolts oiled where you can run the nuts off and on by hand. Snug em down and go/

Dave
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top