The oil pressure gauge is not working, pegged out all the way to the right on the gauge. Is there a way to tell if the sending unit is bad or the gauge is bad? Same way for the fuel gauge its not working either, pegged out all the way to the right as well, is there a way to tell if its the gauge or the sending unit. thanks
 
OTC makes a tool to attach to the sender wire, they work like a sender and you can check the gauge. Deere and Ford car dealers had them, so if you know anybody that works there? Its a 6X8 box with five reostats of different resistances to check gauges out. Got one off of ebay a few years ago. Best to replace both components when doing the repair. Make sure the plug in on the back of the gauge cluster is plugged in and taped. Not one of Deeres better ideas.
 
Did both gauges fail at the same time?

If so, it's not likely both senders failed at the same time. Some have a voltage regulator for the gauges, possible a cluster ground issue.

You should be able to disconnect the wire from the sending unit, the gauge will either go full or empty. Ground the wire it should swing the other way. That's a pretty good sign the sending unit is at fault.
 
Check the plug on the back of the gauge cluster first,, if you ground the sender wire it should make the gauge move.The wire going from the gauge to the oil sender seems to go fist one these.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top