JD 48 loader valve support

[drummer481]

Looking for the metal support bracket for a 48 loader approximately 27" long for the control valve and levers. Mine is pretty beat up and I would just like to swap it it out with little or no interruption. Mine looks like somebody must have to thrown a log chain around it to lift the loader, pretty much a cosmetic thing as the loader works great...............

 

[Jim.ME]

Searching salvage yards is an option. Fabricating one, using measurements of the one on it now may be the quickest option.

Here is the Parts catalog for the 48. When searching part numbers may help identify the parts you need.

https://partscatalog.deere.com/jdrc...6I0JVU0lORVNTX1JFR0lPTiw3NTYyNzpFUVVJUE1FTlRd

This post was edited by Jim.ME on 07/16/2023 at 04:07 am.

 

[Kansas4010]

There's one listed on Ebay right now. You
better be sitting down when you see the
listing.