JD 535 netwrap problem

[NHbalerman]

On my 535 I finally got it working thanks to txjim but rolled a f ew and now it won't get the net wrap to start into the baler. We put a new roll of JD wrap in it and same thing. Tried the powder again and nothing. Got the guide on bottom barely touching the belts. Can anybody help me here?
Thanks

 

[Tx Jim]

You're welcome
Please provide more information. Do netwrap feed rollers rotate when tying cycle is activated. If net isn't wrapping on rubber feed rollers due to high humidity or static electricity then leave powder in it's bottle. IIRC net guide shouldn't be touching belts. Do you have a net attachment operators manual # 87620?

 

[NHbalerman]

Yes i got that manual and the rollers do turn when activated and it isn't sticking to the rubber rolls but it says to polish that brake rod I'm going to try that because it does seem like the roll of netwrap isn't turning to let the wrap out. I did polish the silver plates that the roll sets on
Thanks