jd 60 3 point

[jlw318]

I have a jd 60 that has two lift arms on the bottom and two arms at the top with a bar with a hole in the center between them. Could someone send me some pics of what's missing to hook up to an implement or how it is done? Thanks

 

[Dennis V]

Look at ad 302400 for the 800 3 point. The item in the middle, darker item is the item that connects the center link to the implement. Hope it helps.

 

[jlw318]

Thanks, it helps some, but couldn't get pic to clear up when enlarged. How does the center piece hook up?

 

[jturbo10]

You likely have an 800/801 style three point hitch. The cross bar attaches like a "top link" to the implement which must have a special attachment receptacle some call a "gooseneck" which has a hole through it at top where a pin goes through to secure it. I have the same arrangement on my 56 JD 50. I think the bar connecting the two upper links is called an "evener bar" but I not sure. I bought a couple of goosenecks and the bar on Ebay but they can be pricey. Good luck.

 

[Tom N OK]

You might try this link and see if it helps.
Tom

http://public.fotki.com/deanvp/hitches/jd/800_series-1/801/