1stgenJDowner
New User
Hey all, this is my first JD 2cyl and nobody else in my family has ever worked with these before and frankly tells me they're a waste of time (red power...). I have a 51 B and I finally got it running and mostly driving, however if I go above low throttle the machine shakes bad enough that if you have a wrench on the operator station, it will vibrate it right off.
Now I can't imagine these old 2cyl tractors would have sold as well as they did if they vibrated so bad so with that I'm trying to narrow down what could be causing it.
I have seen on this forum that various clutch components can cause vibration, so I replaced all the discs in the clutch including the drive disc making sure the 2 Vs are pointing at each other. Unfortunately that hasn't made any difference at all so I'm looking for suggestions as to what to do.
Any suggestions are welcome!
Now I can't imagine these old 2cyl tractors would have sold as well as they did if they vibrated so bad so with that I'm trying to narrow down what could be causing it.
I have seen on this forum that various clutch components can cause vibration, so I replaced all the discs in the clutch including the drive disc making sure the 2 Vs are pointing at each other. Unfortunately that hasn't made any difference at all so I'm looking for suggestions as to what to do.
Any suggestions are welcome!