jd serial numbers

lynn herring

New User
My question concerns 2 cyl. John Deere Serial #"s. Were the plates stamped prior to being attached to the tractors or were they stamped after the plate was rivited onto the tractor? I am especially interested in the models made in the late 1930"s and all 1940"s (letter series A,B,D,G & H"s). Thanks for any help
 
saw an article about a tractor that had two plates,one on top of each other, one serial number apart,this would make me think they were stamped ahead of time. bill m.
 
Lynn,
Tractors from which I have removed the s/n plate during restoration have paint underneath them so they were attached after painting. Looking at the quality of the stamp, evenness of numbers, evenness of depth, etc., I think it would have been difficult to achieve that quality if the plate were stamped after being put on the tractor. So, my assumption would be it was run through a stamping machine and attached at the end of production, perhaps after it passed certification tests.

Also, the s/n plate on the D is behind the seat and would not be possible to stamp after installation.
 
I can’t help but ask, I’m curious as to why you’re curious about whether it was stamped before or after it was installed?
I have an A around 1948 with a missing sn# plate and would love to find a way to figure out what is should be or at least the range it would fit in. After reading this post I ran out to examine the housing closely to see if it may have been stamped in place and if there were any trace of the numbers on the housing but I couldn’t find anything.
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top