JD wrenches for?

[steel]

Although I know the wrench second from the bottom will fit my B, we're not sure exactly what the other three fit. Can anyone shed some light please? Thanx

 

[Mike M]

The one you say for the B (before pressed frame) will also fit an H. The clear bottom one fits an A before the pressed frame. I think it fits a G too. I think the top one is used with the bottom one.

 

[Sleufoot]

The short S shaped wrench is for the bolt to remove a flywheel. No sure what model though.

 

[Mike(NEOhio)]

The big J-shaped one is for the H flywheel and large oil stud on the head.

 

[ET]

The second from the top is a flywheel wrench for an unstyled A. The flat end is for turning the engine by engaging the slot in the fywheel.

 

[Ken Loewenhagen]

Second one from the top is for the nuts on the wheel lug bolts and flywheel bolts. I've used one on my D

 

[David from Kansas]

That bottom wrench with the off-set will also wit the model D also. There are two styles; one has a longer off-set and I have been told it is the best to use on a G because of the size of the flywheel. That second one down is identical to one we carried on an unstyled D but may be correct for others also. Used in conjunction with the off-set socket ended wrench.

 

[steel]

Thanks for all the feedback. steel

 

[Nt22]

.

 

[Dan in Ohio]

Collecting and not much else, sorry can't help you much.

 

[Mike(NEOhio)]

Correction, it's for the cylinder head nuts. There was an adapter for the larger nut on the oil stud. Just happened to be looking in my parts book today.