JF CM165 MOWER

[GeorgeAus]

I need some advice on height adjustment options for one of these.
Hoping it is really a copy of some of the other 165 brands
It is clearly marked as a JF CM165 (See Pics). I found the applicable manual, which indicates there is an adjustment bolt. I cannot find it !. Any suggestions ? Even if its another way of increasing the cutting height.

 

[Jim.ME]

Looking at the drawing you posted. Are the guide shoes bolted to the hub the adjusting bolt is shown in? If so, you may need to remove the guide shoe to access the adjusting bolt. more pictures of the drum and the underside might help.

 

[GeorgeAus]

Looking at the drawing you posted. Are the guide shoes bolted to the hub the adjusting bolt is shown in? If so, you may need to remove the guide shoe to access the adjusting bolt. more pictures of the drum and the underside might help.

Being a bit of a rookie, I foolishly imagined the bolt would be accessible via the gap between the drum using a long socket extension.
I'm pretty sure it is bolted from underneath with 4 bolts. I will unbolt these in the next few days and have a proper look.