john deere 110

[frank van den dorpel]

hi.we have a 1974 jd 110,with a 48 in.mower deck.we are trying to find the belts for the mower.would anyone have the part numbers?thank u.

 

[Harvey 2]

Your friendly John Deere dealer should be able to tell you the part #

 

[frank van den dorpel]

up here in the colonies,nobody goes back that far,

 

[MarknWaterloo]

Take a look in JDParts.com? The local auto parts store (NAPA here) might be a more cost effective solution though.

 

[willie in mn]

Go to your local friendly NAPA store. Find the old guy who knows how to read a book, most likely not in computer. Look in the section of the book marked ATTACHMENTS. You need to have the model number of the mower deck.
Willie

 

[bill mart]

not sure if this is your model deck but the model 47 deck uses #M41960 for blade pulley to pulley.Bill

 

[JDG]

Get your belts from mother deere or industral belts. NAPA belts will last as long as it takes you to put them on.

 

[Steve-N-tN]

This might help--its from the John Deere Parts Manual--Item 6 GX20072 Flat Belt 1 SUB FOR GY20072, Mower Drive
John Deere L110 Parts Manual

 

[ShowMEguy]

This place has a ton of guys who love the small LGTs

weekendfreedommachine.com

 

[gtx1967jewison]

Deere has them in stock.

 

[bill mart]

dont think a 1974 model is an L110. BILL

 

[leon]

That variable speed drive, variator, is very picky about belts. Give yourself a head start, use only belts from Deere there, and always replace them as a pair.

 

[Mike M]

John Deere always had decent prices on their belts. They also hardly ever use anything os standard size so finding the right ones elsewhere is not likely.
Several different deck belts for those. Do yourself a favor if your serial tags are still there write all the numbers down,take any old belts along with you and go to a JD dealer.

 

[cowboylogic1957]

According to the parts books, a 1974 JD 110 (this is NOT a L110) originally would have come with a 39 or a 47 inch mower deck. If you have the original 47 inch deck, the blade to blade part # is M41960...$31.64. The deck drive belt has 3 different choices depending on the serial # of the tractor and the mower deck. If someone has installed a newer 48 inch deck, you will probably have to measure and match the belts unless the belts have part #'s on them.
Hope this helps a little.

 

[Steve-N-tN]

(quoted from post at 03:19:13 02/13/13) This might help--its from the John Deere Parts Manual--Item 6 GX20072 Flat Belt 1 SUB FOR GY20072, Mower Drive
John Deere L110 Parts Manual

My bad--not an L110--sorry