John Deere 1530 coupling

[1dawg]

I recently bought a 1530 tractor and it has a set of rear remotes, however one of the couplers is not working. I took it off and have it soaking to see if I can clean it up, but if I can not I was wondering what I need to order to replace it. I have a picture to show the condition before I removed it. I have a hydraulic top link ordered since the tractor did not come with a top link. If I can get this one working or replace it, is that all I need to get the top link working?

 

[Tx Jim]

JD part # for complete receptable is RE15361 https://greenfarmparts.com/shop/john-deere-hydr-quick-coupler-socket-re15361/ https://www.shortlineparts.com/john-deere-old-style-female-coupler-1-2-pipe.html

 

[1dawg]

Thank you for your help. Assuming nothing is wrong with the rear hydraulic system, this should be all I need to run the hydraulic top link, correct?

 

[Tx Jim]

Thank you for your help. Assuming nothing is wrong with the rear hydraulic system, this should be all I need to run the hydraulic top link, correct?

Yes other than correct type male coupler tips.

 

[1dawg]

It finally came in and I found out that it did not come with hoses. Here is a picture of what it came with. So I guess I need to get hoses and tips, but what size hose ?

 

[1dawg]

Also what type fittings do I need for the cylinder side of the hose?

 

[Jim.ME]

Also what type fittings do I need for the cylinder side of the hose?

That is hard to say as different cylinders use different fittings, they are not a one size fits all thing, we can see your cylinder and guessing could have you buying hoses with the wrong fittings on them. If you use a local place for hoses and fittings, take the cylinder to them and ask them to help you ID what you need.

1/2 inch (SAE #8) is a common size used, but it can vary.