Duane Kline
New User
Does anyone know the valve adjustment for a 2010 John Deere? My manual does not have anything in it. Need firing order please
buickanddeere
Well-known Member
Has to be in the JD service manual or even the operator's manual.1-800-522-7448.
An IT tractor manual is only good for swatting bugs.
An IT tractor manual is only good for swatting bugs.
It wouldn't hurt to tell us if it's gas or diesel.
The firing order is cast into the exhaust manifold, at least it is on the diesel I service from time to time.
Valve setting spec. IS in the I&T manual, I'll take a look the next time I get to
the farm, and post the info, if someone does beat me to it.
The firing order is cast into the exhaust manifold, at least it is on the diesel I service from time to time.
Valve setting spec. IS in the I&T manual, I'll take a look the next time I get to
the farm, and post the info, if someone does beat me to it.
1010 and 2010, 115, 144, and 165, gas or diesel - all the same. Rockers are adjusted with a cold engine. Intakes are .012" clearance and exhausts are .018" clearance.
With #1 at TDC of compression stroke- adjust #1 cylinder. Then turn 1/2 revolution and adjust #3 cylinder. Turn another 1/2 and do #4. Turn another half and do # 2.
With #1 at TDC of compression stroke- adjust #1 cylinder. Then turn 1/2 revolution and adjust #3 cylinder. Turn another 1/2 and do #4. Turn another half and do # 2.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.
Copyright © 1997-2025 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy