John Deere 45 loader

[46m]

Will A 45 john deere loader fit on a farmall m. This loader is on a 620 right now.Will it need differt mountigs.

 

[PJH]

Will A 45 john deere loader fit on a farmall m. This loader is on a 620 right now.Will it need differt mountigs.

They made mounts to fit other brands. You can look up the parts manual and it will show what was made for them.

 

[NY 986]

Will A 45 john deere loader fit on a farmall m. This loader is on a 620 right now.Will it need differt mountigs.

I've seen them on older Farmall's such as the M and the mounts look fairly universal. Funny you mention this as I am thinking seriously about putting a 45 loader on a M. I want a backup snow pusher and I have always not liked the Horn loader for that job as it rides up over hard pack rather easily. Report back on progress as I will not have mine done before fall. The tractor needs work and the loader will not be along until I run the area auction circuit including the area 2 cylinder show in July.

 

[NY 986]

They made mounts to fit other brands. You can look up the parts manual and it will show what was made for them.

There was a bundle to be ordered by the dealer if the loader was sold to go on an older Farmall. This included a valve control which worked with the Lift All system for a double acting cylinder if the Christmas tree valve was not present.

 

[onefarmer]

Will A 45 john deere loader fit on a farmall m. This loader is on a 620 right now.Will it need differt mountigs.

Absolutely! I have one on my M and my SM. I used an angle iron and a flat steel along with a 12"x12" 1/2" plate to make the brackets for the rear. Added an extra Farmall hitch mount so there would be two per side. And used the JD mounts for the front.

 

[JIM MN]

Get the mounting brackets off the JD 620. With a torch and welder, it fits. You can plumb in hydraulics.