JOHN DEERE 630 HITCH DESIGN

[PBMILKSHAKE]

I’m looking for a pulling hitch design for my 69 john deer 630. Something similar to the A and G designs that everyone is running with the dished back and gussets. Never seen one for a 630. Anyone know someone who makes one or even just a picture to help me design? Thanks in advance!

 

[VicS]

You mean you have a 59 JD 630. Your 630 is a A underneath. If you are serious about pulling a 630. Just buy a A . Bore and stroke it. And a 100 ?other things. And put your sheet metal on it. Up at the left top there is 3 bars. Tap them
All the forums will pop up. Go down to the pulling forum. Ask there. Ps. I haven't compared the gaskets, but should be the same. At least as a 60. Have fun!

 

[MSD]

You mean you have a 59 JD 630. Your 630 is a A underneath. If you are serious about pulling a 630. Just buy a A . Bore and stroke it. And a 100 ?other things. And put your sheet metal on it. Up at the left top there is 3 bars. Tap them
All the forums will pop up. Go down to the pulling forum. Ask there. Ps. I haven't compared the gaskets, but should be the same. At least as a 60. Have fun!

A and 630 take different gaskets. There is a guy from MO. that put 630 sheetmetal on his A. Looked pretty unique.