john deere b

720diesel

Member
I need the torque for the block, head, and connecting rods. I also need the clearances for the rod bearings.The tractor is a 1948 John Deere B. Thanks!
 
Torque for block to case is 1500 inch pounds.
Cylinder head to block is 1150 inch pounds.
Connecting rods...all I can find is to tighten the nuts securly and put in cotter pins.
Connecting rod bearing oil clearance is .003 inch.
 
Set connecting rod bolts to 75 ft-lb, then tighten as needed to insert cotter.

Set Running Clearance from 0.001 to 0.003-inch. Thickness of the thinest shim is 0.003".

1150 in-lbs for cylinder head is right, and

125 ft-lbs for cylinder block-to-case is good.

(PatB)
Restoration Guide, JD H
 
Yesterday's Tractor Forums

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top